Archives

Structural Flame Retarded Epoxy Sealant

April 1, 2020 1:53 pm Published by Technical

S-2920E is a two-part, cold curing epoxy sealant. It is designed to seal air filters and has the particular feature... View Article

April 1, 2020 1:44 pm Published by Technical

S-2919E is a two-part, cold curing epoxy sealant. It is designed to seal air filters and has the particular feature... View Article

April 1, 2020 1:11 pm Published by Technical

S-236E is a two-part cold-curing adhesive. It is designed to be injected into gaps between concrete. As such it is... View Article

September 20, 2019 9:53 am Published by Technical

S-211E Epoxy Potting Compound is a two-part, low viscosity product. S-211E has been specially formulated to cure with low exotherm,... View Article

September 20, 2019 9:42 am Published by Technical

S-2605E is a two-part epoxy adhesive curing at room temperature. It has a 40-minute work life, so conferring a longer... View Article

September 20, 2019 9:41 am Published by Technical

S-2150E is a two part adhesive curing at room temperature. S-2150E is a general purpose adhesive with good gap-fill combined... View Article

September 20, 2019 9:15 am Published by Technical

S-2775E is a two-part, cold curing adhesive. S-2775E has good resistance to chemicals and bonds a wide variety of plastics.

September 19, 2019 3:05 pm Published by Admin

S-2631E is a rapid curing adhesive with a measure of heat resistance and chemical resistance.

August 8, 2019 7:57 am Published by Technical

S-2825FRE is a two-part, cold curing, A2 adhesive of limited combustibility designed to bond brick slips to a variety of... View Article

September 17, 2018 9:30 am Published by Admin

S-2765E is a two-part, cold curing adhesive designed to bond special bricks. S-2765E can be used to bond damp facing... View Article